C&C Shows Off U550 Tractor at Shanghai Intermodal Asia

 

 

Exterior Painting with latte art

The shield logo and the letter “C&C” in the front face are highly identified, and U550 indicates that the vehicle delivers 550 horsepower.

 

The manufacturer sticks a Kirin shaped festoon to the side of the driving cab, making it adorable. “EURO V” on the upper part shows the tractor is up to Euro V emission standard, and “6K inside” on the lower represents that the vehicle adopts 6K series engine.

 

Driving Cab with Simplicity, Generosity and Humanized Design

 

The interior of this cab delivers a feeling of simplicity and generosity. Its berth is big enough to accommodate a little over-weighted person to rest. The instrument cluster is a liquid crystal display, looking more simple and full of technology.

 

 

Chassis highlights--K13 Engine  

 

This vehicle uses C&C Trucks’ latest 13L and 550hp engine YC6K1355-50, with a maximum horsepower up to 550 hp. The engine works together with a FAST 12-speed manual transmission, C12JSDQXL260T, a transmission of all helical gear with whole- aluminum alloy shell.

 

The rear axle uses C&C QL400 axle, and the speed ratio is no more than 2.92. The introducing of high-powered engine enables a lower engine speed at the same traveling speed, so that the oil consumption is reduced. The tire model is 12R22.5, and the wheels need lubricating at the wheel end. C&C provides free maintenance within a range of 50,000 km. Both the front and the rear adopt lightweight steel plate spring suspensions, with 3 steel plates in the front and 4 in the rear. The oil tank has a capacity of 700L, for extended range and less oil charging frequency.